Technology

Self-healing wireless mesh that keeps traffic moving.

Intelligent Connectivity Anywhere (ICA) is our patented technology and the engineering underneath every product. It keeps a network running when a single link can't.

Watch it reroute

SourceControlroom

All links up

A link fails or its quality drops. The mesh detects it, reroutes through a healthy path, and traffic keeps flowing. The whole sequence happens automatically, in the field, in real time.

Self-healing mesh

Sub-second recovery when a node, link or path goes down. Traffic moves to an alternative path automatically, with no manual intervention and no single point of failure.

Automatic path selection

The network continuously picks the best route by latency, load and link quality, and can distribute traffic among selected sites or servers by least path cost.

Fibre-like throughput

A data rate of up to 1,201 Mbps per radio. Dual radios reduce the throughput loss that normally limits multi-hop wireless, with greater than 30 hops of backhaul.

Multiple drop-off points

Several nodes can send and receive traffic through different exit gateways, which adds capacity through load balancing and adds resilience.

A virtual Layer 2 switch

One management IP address, end-to-end Layer 2 transparency and VLAN 802.1Q pass-through. The network behaves like a switch with its ports distributed wirelessly.

End-to-end security

AES-128 on the wireless link and AES-256 end to end, with client and neighbour MAC access control.

Seamless mobility

Dual radios connect to the next node before leaving the current one. Path switching typically takes place within 5 ms, for trains, vehicles and cranes.

No licence fees

Cost scales with the hardware, not with how large your network grows.

Simple installation

PoE+ carries power and data over a single cable, and spectrum scan and antenna alignment tools help with installation.

Network topologies

Five wireless topologies, one platform that supports all of them.

Point to point, point to multipoint, ring, and mesh network topology diagrams

Point to Point

A single dedicated link between two locations, the simplest way to bridge a fixed distance.

Point to Multipoint

One central node fans out to several remote sites, ideal for a hub with multiple spokes.

Daisy chain

Nodes link one after another along a route, a simple way to extend reach along a corridor or perimeter.

Ring

Nodes connect in a loop so traffic has two paths around the ring, keeping data flowing if one link drops.

Mesh

Every node can reach several neighbors at once, the most resilient topology and the foundation of Anywhere’s self-healing network.

Want to go deeper on the architecture?

Talk with our team about your design.

Talk to our team